Repair Table Steps
Place the available pieces on the table.
Match visible edges and image continuity before forcing the connection.
If a piece refuses to connect, back it away, rotate or realign it, then try again slowly.
After success, update the tracker and keep foil status separate from base-card ownership.
Why Pieces May Not Connect
The most likely causes are slight misalignment, using pieces from different cards, missing a torn piece, or trying to complete a card before the table accepts the edge match. Exact tolerance is not officially published, so this page avoids pretending there is a known pixel-perfect value.
Common Mistakes
Do not treat every damaged card as a duplicate.
Do not mark foil ownership unless the repaired card is visibly foil.
Do not assume a failed connection means the card is bugged until you have retried alignment and checked whether all pieces belong together.
Known Issues
Community reports mention repair-table frustration, but exact reproduction steps remain unverified. If the table appears stuck, leave the table, reopen it, and preserve the save before doing risky inventory actions.
Evidence to Capture
If repair still fails after careful alignment, record the card name, piece layout, whether all pieces are from one card, and whether reopening the table changes behavior.